Fri, Feb 28, 2020 at 07:39:47AM +0100, Jan Braun wrote:
> The Linux kernel uses SIGPWR to tell init "there's a power failure
> imminent". There's a difference to "please shutdown the system", even if
> (current versions of) busybox and openrc choose to shutdown the system
> when told about an imminent power failure.
The Linux kernel never sends SIGPWR to init on most platforms.
Grepping the source, there are only about two places where SIGPWR can be
sent to the init process from the kernel: machine check exception on S390,
and some power-related hardware failure indication on SGI workstations.
I'm not familiar with either of those but I suspect in both cases
the signal is expected to initiate immediate shutdown. Otherwise, why
would they signal init.
Just for reference, I checked apcupsd sources. It does include an example
of sending SIGPWR to init when some UPS event arrives, but it's just an
example, and in that setting spawning some script would be a better approach
anyway. The same applies to pretty much anything else in userspace that might
be monitoring power supply. It should not be signalling init, it should
have some sort of a configuration event handler.
Unless it's matter of principle, hard-coding SIGPWR as a shutdown signal
sounds like a decent idea to me, at least on Linux. LXD and similar
containers might be the only class of applications for which signalling
init like that actually makes sense. The distinction between SIGINT for
reboot and SIGPWR for shutdown does not sound awful either.
Received on Fri Feb 28 2020 - 09:45:41 UTC
This archive was generated by hypermail 2.3.0
: Sun May 09 2021 - 19:44:19 UTC